8.Insert the toner cartridge back into the machine.
9.Close the fuser unit cover.
10.Close the top cover and open the output tray. Printing automatically resumes.
Solving other problems
The following chart lists some trouble conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, contact a service representative.
Other problems include:
•See "Power problems" on page 57.
•See "Paper feeding problems" on page 58.
•See "Printing problems" on page 58.
•See "Printing quality problems" on page 60.
•See "Common Windows problems" on page 62.
•See "Common Linux problems" on page 62.
•See "Common Macintosh problems" on page 63.
Power problems
Click this link to open an animation about solving power problems.
Condition | Suggested solutions |
|
|
|
|
The machine is | • Plug in the power cord and press | (power) |
not receiving | on the control panel. |
|
power, |
| |
|
|
or the connection cable between the computer and the machine is not connected properly.
•Disconnect the machine cable and reconnect it.
Troubleshooting_ 57
