Printing a cleaning sheet
If you are experiencing blurred, faded, or smeared printouts, you can clear the problem by printing a cleaning sheet, provided by your printer. You can print:
•OPC cleaning sheet: cleans the OPC drum of the toner cartridge.
•Fuser cleaning sheet: cleans the fuser unit inside the printer.
This process will produce a page with toner debris, which should be discarded.
1Make sure that the printer is turned on with paper loaded in the tray.
2Press Menu until System Setup appears on the bottom line of the display and press OK.
3Press the Scroll buttons until Maintenance appears and press OK.
4Press the Scroll buttons until Clean Fuser or Clean Drum appears and press OK.
Your printer automatically picks up a sheet of paper from the tray and prints out a cleaning sheet with dust or toner particles on it.
Maintaining the toner cartridge
Toner cartridge storage
Toner cartridges contain components that are sensitive to light, temperature, and humidity. Samsung suggests users follow the recommendations to ensure the optimum performance, highest quality, and longest life from your new Samsung toner cartridge.
Store this cartridge in the same environment as the printer it will be used in; this should be in controlled office temperature and humidity conditions. The toner cartridge should remain in its original, unopened package until installation – If original packaging is not available, cover the top opening of the cartridge with paper and store in a dark cabinet.
Opening the cartridge package prior to use dramatically shortens its useful shelf and operating life. Do not store on the floor. If the toner cartridge is removed from the printer, always store the cartridge:
•Inside the protective bag from the original package
•Correct side up in a horizontal position (not standing on end)
•Do not store consumables in;
-Temperature greater than 40°C (104°F).
-Humidity range less than 20% and not greater than 80%.
-An environment with extreme changes in humidity or temperature.
-Direct sunlight or room light.
-Dusty places.
-A car for a long period of time.
-An environment where corrosive gases are present.
-An environment with salty air.
Handling instructions
•Do not touch the surface of the photosensitive drum in the cartridge.
•Do not expose the cartridge to unnecessary vibrations or shock.
•Never manually rotate the drum, especially in the reverse direction; this can cause internal damage and toner spillage.
Use of non-Samsung and refilled toner cartridge
Samsung Electronics does not recommend or approve the use of non- Samsung brand toner cartridges in your printer including generic, store brand, refilled, or remanufactured toner cartridges.
Caution
• Samsung’s printer warranty does not cover damage to the machine caused by the use of a refilled, remanufactured, or
Estimated cartridge life
Estimated cartridge life (the life of the toner cartridge yield) depends on the amount of toner that print jobs require. The actual
Saving toner
To save toner, press Toner Save on the control panel. The button backlight turns on.
Using this feature extends the life of the toner cartridge and reduce your cost per page, but it also reduces print quality.
Checking the remaining toner
You can check the level of toner left in the cartridge.
If you are having print quality problems, this can help you determine if the problem is caused by low toner.
1Press Menu until System Setup appears on the bottom line of the display and press OK.
2Press the Scroll buttons until Maintenance appears and press OK.
3Press the Scroll buttons until Supplies Life appears and press OK.
4Press the Scroll buttons until Toner Remains appears and press OK.
The display shows the percentage of the remaining toner.
Note
While the following messages are appearing on the display, the
-Invalid Toner, NonGenuine Toner, Replace Toner,
Toner Exhausted
8.3 <Maintenance>
