Connecting your System to the Power Supply
☛☛Before plugging your system into a main socket, you must check the voltage.
11 Plug the main unit's power cord into the AC power supply.
22 Press the STANDBY/ON (
) button to turn your
Inserting Remote Control Batteries
Insert or replace remote control batteries when you:
◆◆ Purchase the
◆◆ Find that the remote control is no longer operating correctly
☛☛When replacing the batteries, use a new set of batteries and never mix alkaline and manganese batteries.
11 Place your thumb on the position marked + on the battery compartment cover (rear of the remote control) and pull the cover in the direction of the arrow.
22 | Insert two AAA, LR03 or equivalent batteries, taking care to respect the |
polarities: |
◆◆ + on the battery on 
in the battery compartment ◆◆ – on the battery on 
in the battery compartment
33 Replace the cover by sliding it back until it clicks into position.
◆◆ If you will not be using the remote control for a long time, remove the batteries to prevent corrosion.
◆◆ The remote control can be used up to approximately 23 feet (7 meters) in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.
Connecting the Speakers
The Speakers connector terminals are located on the rear of the system. | ENG |
|
◆◆ Left speaker (marked L) ◆◆ Right speaker (marked R)
11 To achieve the correct sound quality, connect those speaker connector cables to the speaker connector terminals of the system.
|
|
|
| |
|
|
| SPEAKERS OUT |
|
|
|
| (IMPEDANCE3Ω) |
|
Front |
|
|
| Front |
Speaker (R) | R |
| L | Speaker (L) |
|
| Rear panel |
| |
|
|
|
|
|
Subwoofer |
|
| 2.1CH SPEAKERS OUT |
|
| SUBWOOFER |
|
|
|
Front | FRONT |
|
| Front |
R | L | Speaker (L) | ||
|
|
| ||
Speaker (R) |
|
| IMPEDANCE FRONT : 3Ω |
|
|
|
|
| |
|
|
| SUBWOOFER : 4Ω |
|
|
| Rear panel |
| |
|
|
|
| |
Rear |
|
|
| Rear |
Speaker(R) |
|
|
| Speaker(L) |
Subwoofer |
|
|
| Subwoofer |
(R) |
|
|
| (L) |
Front |
|
|
| Front |
Speaker (R) |
|
|
| Speaker (L) |
|
|
| Rear panel |
|
22 Connect the LED cables of the Front Speakers/Subwoofer to each LED Terminals of the system.
◆◆ You can enjoy the special light effect on your speakers.
Front |
Speaker |
FRONT |
LED |
Front |
Speaker |
Rear panel |
9 |
