TP-Link TL-WR710N manual Quick Setup Wireless

TL-WR710N

150Mbps Wireless N Mini Pocket Router

Figure 3-17 Quick Setup - Wireless

¾Wireless Name of Root AP - Enter the SSID that you want to access.

¾MAC Address of Root AP - Enter the MAC address of AP that you want to access.

¾Survey - Click this button, you can survey the AP which runs in the environment.

¾Region - Select your region from the pull-down list. This field specifies the region where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance.

¾Wireless Security Mode - This option should be chosen according to the security configuration of the AP you want to access. It is recommended that the security type is the same as your AP’s security type.

¾Wireless Password - If the AP your router is going to connect need password, you need to fill the password in this blank.

2.Click Survey button on the Wireless page as shown in Figure 3-17,and then AP List page will appear as shown in Figure 3-18.Find the SSID of the Access Point you want to access, and click Connect in the corresponding row. For example, the third item is selected. The target network’s SSID will be automatically filled into the corresponding box which is shown as the Figure 3-17.

- 22 -