TL-WR710N
150Mbps Wireless N Mini Pocket Router
•Subnet Mask - The subnet mask associated with the WAN IP Address.
Click the Release to delete the network parameters, and click the Renew button to obtaining network parameters.
¾Traffic Statistics - The Router’s traffic statistics.
•Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port.
•Received (Packets) - Traffic that counted in packets has been received out from the WAN port.
•Sent (Bytes) - Traffic that counted in bytes has been sent out from the WAN port.
•Sent (Packets) - Traffic that counted in packets has been sent out from the WAN port.
¾System Up Time - The length of the time since the Router was last powered on or reset.
Click the Refresh button to get the latest status and settings of the Router.
8.3 Quick Setup
Please refer to Section 3.2: "Quick Installation Guide."
8.4 Working Mode
The Router supports five operation mode types: Wireless Router, Access Point, Repeater, Client and Wireless Client Router. Please select one you want. Click Save to save your choice, which is shown as Figure
Figure 8-3 Working Mode
¾Wireless Router - The wireless Router Mode. In this mode, the device enables
¾Access Point - The wireless access point mode.
¾Repeater - The wireless Repeater Mode. It could extend the range of wireless network.
¾Client - The Client Mode. The computer connected by Ethernet could get access to an AP by Client mode.
