TP-Link TL-WR710N manual Dhcp Settings

TL-WR710N

150Mbps Wireless N Mini Pocket Router

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is not promoted) or 16 ASCII characters.

)Note:

If you do not set the key, the wireless security function is still disabled even if you have selected Shared Key as Authentication Type.

7.7 DHCP

Figure 7-10 The DHCP menu

There are three submenus under the DHCP menu (shown in Figure 7-10),DHCP Settings, DHCP Client List and Address Reservation. Click any of them, and you will be able to configure the corresponding function.

7.7.1 DHCP Settings

Choose menu “DHCP → DHCP Settings”, and then you can configure the DHCP Server on the page as shown in Figure 7-11.The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the Router in the LAN.

Figure 7-11 DHCP Settings

¾DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually.

- 172 -