TL-WR710N 150Mbps Wireless N Mini Pocket Router
Click the Save button to save your settings.
)Note:
1.Only the PC on your LAN can use the MAC Address Clone function.
2.If you change WAN MAC Address when the WAN connection is PPPoE, it will not take effect until the connection is
8.5.3 LAN
Choose menu “Network → LAN”, and then you can configure the IP parameters of the LAN on the screen as below.
Figure 8-13 LAN
¾MAC Address - The physical address of the LAN ports, as seen from the LAN. The value can't be changed.
¾IP Address - Enter the IP address of your Router in
¾Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask.
¾IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allows your devices in LAN can watch TV.
)Note:
1.If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
2.If the new LAN IP Address you set is not in the same subnet with the previous one, the IP Address pool in the DHCP server will be configured automatically，while the Virtual Server and DMZ Host will not take effect until they are
- 202 -
