TP-Link TL-WR710N manual ¾ LED, Status Indication

TL-WR710N

150Mbps Wireless N Mini Pocket Router

¾LED

Status	Indication
Solid Blue	The device is working properly.
	Condition 1: System is booting.
Blinking	Condition 2: The Ethernet Cable or USB Device is
	connecting to the product.
	Table 1-1 The LED Description

¾USB: The USB port connects to a USB storage device.

¾Reset：It is used to reset the Router to its factory defaults. With the Router powered on, use a pin to press and hold the Reset button (about 5 seconds) until the SYS LED becomes quick-flash from slow-flash. And then release the button and wait the Router to reboot to its factory default settings.

¾LAN/WAN: This LAN/WAN port works as LAN in AP/Repeater/Client/WISP Client Router mode and as WAN in Wireless Router mode. As LAN, it connects the Router to the local PC; as WAN, it enables you connect the DSL/cable Modem, or Ethernet.

¾LAN: This LAN port works as LAN in Wireless Router/ AP/Repeater/Client/WISP Client Router mode. It connects the Router to the local PC.

- 4 -