TP-Link TL-WR710N manual Quick Setup PPPoE

TL-WR710N

150Mbps Wireless N Mini Pocket Router

¾PPPoE - For this connection, you will need your account name and password from your ISP.

If you have applied ADSL to realize Dial-up service, you should choose this type. Under this condition, you should fill in both the User Name and Password that the ISP supplied. Please note that these fields are case-sensitive.

Figure 3-21 Quick Setup - PPPoE

¾Dynamic IP - Your ISP uses a DHCP service to assign your Router an IP address for connecting to the Internet. When the Router connects to a DHCP server, or the ISP supplies you with DHCP connection, please choose this type. If you choose this type of connection, no configuration should be set and you can go on with the wireless configuration in Figure 3-23.

¾Static IP - This type of connection uses a permanent, fixed (static) IP address that your ISP assigned. In this type, you should fill in the IP address, Subnet Mask, Default Gateway, and DNS IP address manually, which are specified by your ISP. Then click Next and proceed to Figure 3-23.

Figure 3-22 Quick Setup - Static IP

2.You can configure the basic settings for the wireless network on this page.

- 24 -