TP-Link TL-WR710N manual Bandwidth Control Rule List

TL-WR710N

150Mbps Wireless N Mini Pocket Router

Figure 8-74 Bandwidth Control Rule List

¾Description - This is the information about the rules such as address range.

¾Egress Bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0.

¾Ingress Bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0.

¾Enable - This displays the status of the rule.

¾Modify - Click Modify to edit the rule. Click Delete to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.

Step 1: Click Add New… shown in Figure 8-74,you will see a new screen shown in Figure 8-75.

Step 2: Enter the information like the screen shown below.

Figure 8-75 Bandwidth Control Rule Settings

¾Enable - Enable or disable the rule.

¾IP Range - Interior PC address range. If both are blank (or 0.0.0.0), the domain is no effective.

¾Port Range - The port range which the Interior PC access the outside PC. If all are blank (or 0), the domain is no effective.

¾Protocol - Transport layer protocol, here there are All, TCP, UDP.

- 245 -