TL-WR710N

150Mbps Wireless N Mini Pocket Router

broadcast and multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the DTIM Interval is the same as Beacon Interval.

¾Enable WMM - WMM function can guarantee the packets with high-priority messages being transmitted preferentially. It is strongly recommended enabled.

¾Enable Short GI - This function is recommended for it will increase the data capacity by reducing the guard interval time.

¾Enable AP Isolation - This function isolate all connected wireless stations so that wireless stations cannot access each other through WLAN. This function will be disabled if WDS/Bridge is enabled.

)Note:

If you are not familiar with the setting items in this page, it's strongly recommended to keep the provided default values; otherwise it may result in lower wireless network performance.

8.6.5 Wireless Statistics

Choose menu “Wireless Wireless Statistics”, and then you can see the MAC Address, Current Status, Received Packets and Sent Packets for each connected wireless station.

Figure 8-23 Wireless Statistics

¾MAC Address - The connected wireless station's MAC address

¾Current Status - The connected wireless station's running status, one of STA-AUTH /

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /

Disconnected

¾Received Packets - Packets received by the station

¾Sent Packets - Packets sent by the station.

¾Configure - The button is used for loading the item to the Wireless MAC Filtering list.

Allow - If the Wireless MAC Filtering function enable, allow the station to access.

Deny - If the Wireless MAC Filtering function enable, deny the station to access.

- 211 -

Page 225
Image 225
TP-Link TL-WR710N manual Wireless Statistics