TP-Link TL-WR710N manual Repeater Mode

TL-WR710N

150Mbps Wireless N Mini Pocket Router

Figure 2-2 Hardware Installation of the TL-WR710N in AP Mode

1.Connect the LAN or LAN/WAN port of TL-WR710N to the wired network port with an Ethernet cable.

2.Plug the power plug of TL-WR710N in electrical wall socket.

3.Power on the PC(s) and notebook(s).

2.3.3 Repeater Mode

TL-WR710N is used to extend the range of wireless signal of the existing AP or wireless router. On this mode, the wired port LAN/WAN works as LAN. Computer could connect to the device by either wired or wireless way. The SSID of TL-WR710N should be the same as that of the device you repeat.

Figure 2-3 Hardware Installation of the TL-WR710N in Repeater Mode

1.Plug the power plug of TL-WR710N in electrical wall socket.

2.Power on the notebook(s).

- 7 -