TP-Link TL-WR710N manual Quick Setup Finish

TL-WR710N

150Mbps Wireless N Mini Pocket Router

When 11bg mixed mode is selected, only 11bg mixed wireless stations can connect to the Router. It is strongly recommended that you set the Mode to 11bgn mixed, and all of 802.11b/g/n wireless stations can connect to the Router.

)Note:

If 11bg mixed mode is selected in the Mode field, the Channel Width selecting field will turn grey and the value will become 20M, which is unable to be changed.

¾Channel Width - Select any channel width from the pull-down list. The default setting is automatic, which can automatically adjust the channel width for your clients.

¾Channel - This field determines which operating frequency will be used. The default channel is set to Auto. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.

¾Wireless Security - You can configure the security settings of your wireless network.

•Disable Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption.

•WPA-PSK/WPA2-PSK - Input the password of your broadcast SSID.

•No Change - If you chose this option, wireless security configuration will not change.

3.The Finish page is shown as Figure 3-10.Click the Reboot button to make your wireless configuration take effect and finish the Quick Setup.

Figure 3-10 Quick Setup – Finish

3.2.2 Access Point Mode

When you choose Access Point on Working Mode page in Figure 3-5 , take the following steps:

1.Click Next in Figure 3-5,and then Wireless page will appear as shown in Figure 3-11.

- 17 -