TP-Link TL-WR710N manual All changed settings will be lost when defaults are restored

TL-WR710N

150Mbps Wireless N Mini Pocket Router

)Note:

1.New firmware versions are posted at http://www.tp-link.comand can be downloaded for free. There is no need to upgrade the firmware unless the new firmware has a new feature you want to use. However, when experiencing problems caused by the Router rather than the configuration, you can try to upgrade the firmware.

2.When you upgrade the Router's firmware, you may lose its current configurations, so before upgrading the firmware please write down some of your customized settings to avoid losing important settings.

3.Do not turn off the Router or press the Reset button while the firmware is being upgraded, otherwise, the Router may be damaged.

4.The Router will reboot after the upgrading has been finished.

5.10.3 Factory Defaults

Choose menu “System Tools → Factory Defaults”, and you can restore the configurations of the Router to factory defaults on the following screen.

Figure 5-37 Restore Factory Default

Click the Restore button to reset all configuration settings to their default values.

¾The default User Name: admin

¾The default Password: admin

¾The default IP Address: 192.168.0.254

¾The default Subnet Mask: 255.255.255.0

)Note:

All changed settings will be lost when defaults are restored.

5.10.4 Backup & Restore

Choose menu “System Tools → Backup & Restore”, and then you can save the current configuration of the Router as a backup file and restore the configuration via a backup file as shown in Figure 5-38.

- 132 -