TP-Link TL-WR710N manual Dhcp Settings

TL-WR710N

150Mbps Wireless N Mini Pocket Router

You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.

If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page.

)Note:

This page will be refreshed automatically every 5 seconds.

4.8 DHCP

Figure 4-28 The DHCP menu

There are three submenus under the DHCP menu (shown in Figure 4-28),DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function.

4.8.1 DHCP Settings

Choose menu “DHCP → DHCP Settings”, and then you can configure the DHCP Server on the page as shown in Figure 4-29.The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the Router on the LAN.

Figure 4-29 DHCP Settings

¾DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually.

- 55 -