![](/images/new-backgrounds/1170742/17074285x1.webp)
TL-WR710N
150Mbps Wireless N Mini Pocket Router
¾Wireless - This field displays basic information or status for wireless function, you can configure them in the Wireless > Wireless Settings page.
•Working Mode - The current wireless working mode in use.
•Wireless Radio - Indicates whether the wireless radio feature of the AP is enabled or disabled.
•Name (SSID) - The SSID of the AP.
•Mode - The current wireless mode which the Router works on.
•Channel Width - The current wireless channel width in use.
•Channel - The current wireless channel in use.
•MAC Address - The physical address of the Router, as seen from the WLAN.
•WDS Status - The status of WDS connection.
¾WAN - This field displays the current settings or information for the WAN, you can configure them in the Network > WAN page.
•MAC Address - The physical address of the WAN port, as seen from the Internet.
•IP Address - The current WAN (Internet) IP Address. This field will be blank or 0.0.0.0 if the IP Address is assigned dynamically and there is no connection to the Internet.
•Subnet Mask - The subnet mask associated with the WAN IP Address.
•Default Gateway - The Gateway currently used by the Router is shown here. When you use Dynamic IP as the connection Internet type, the Renew button will be displayed here. Click the Renew Button to obtain new IP parameters dynamically from the ISP. And if you have got an IP address, Release button will be displayed here. Click the Release button to release the IP address the Router has obtained from the ISP.
¾DNS Server - The DNS (Domain Name System) server IP addresses currently used by the Router.
¾Traffic Statistics - The Router’s traffic statistics.
•Received (Bytes) - Traffic that counted in bytes has been received out from the WAN port.
•Received (Packets) - Traffic that counted in packets has been received out from the WAN port.
•Sent (Bytes) - Traffic that counted in bytes has been sent out from the WAN port.
•Sent (Packets) - Traffic that counted in packets has been sent out from the WAN port.
¾System Up Time - The length of the time since the Router was last powered on or reset. Click the Refresh button to get the latest status and settings of the Router.
- 29 -