Using SyncThru Web Service

3Click Devices Æ Add device.

If you click Devices, SWAS would search out the printer connected to network. Thus you need to wait for a while.

4Enter the IP address or DNS name of the network printer card and click OK.

Your network print server is added to the device list.

NOTE: You can set SyncThru Web Admin Service to automatically detect print servers on the network. From the Devices page, click Discover settings and set the discovery method and schedule. For details, see the SyncThru Web Admin Service User’s Guide.

1Run your web browser.

2Enter your print server’s IP address in the URL field and click Go.

3Click Network Settings Æ TCP/IP.

4Select Static from IP Address Assignment Method.

5Enter your print server’s TCP/IP addresses and click Apply.

2.3

Programs supplied on the Network Utilities CD

Page 11

Image 11

Samsung Network Printer manual Using SyncThru Web Service, Click Devices Æ Add device

Contents

Page Page Contents Appendix For products fitted with EU-approved radio devices Federal Communications Commission FCC Place and the system is fully assembled Supported network environments Package contentsGetting started Introduction IBM Installing your Network Printer CardSystem requirements Computer Requirements Programs supplied on the Network Utilities CD Installing softwareUninstalling software Viewing the SyncThru Web Admin Service User’s Guide Using SyncThru Web Admin Service IP address setupUsing SetIP Enter your print server’s TCP/IP addresses and click Apply Using SyncThru Web ServiceClick Devices Æ Add device TCP/IP environment Configuring DHCP/BOOTPConfiguring Snmp Using Snmp Dynamic DNS Ddns Configuring SLPUsing SLP Configuring Ddns Bonjour Configuring WinsConfiguring UPnP Using UPnP LPR port Printing protocolsStandard TCP/IP port Windows 2000/XP/2003 Configuring IPP in the print serverSamsung Printer Port IPP port Additional functions Ethernet speed ResetClick Network Settings Æ Reset Click Network Settings Æ General NetWare printing Configuring NetWareNetWare environment Assignments menu Printing in NetWareAdding a queue Adding a printer EtherTalk printing Configuring EtherTalkConfiguring the printer EtherTalk environment Bonjour printer TCP/IP printing Basic concept and terms Wireless network environmentOverview Ieee Ieee 802.11 authenticationWPA Wi-Fi Protected Access WEP encryption Status Description Before configuring the print serverWireless settings Select Network Settings Æ Wireless None Open System No encryption Wireless basic settings Wireless security settingsSecurity Authentication Encryption method Method Mode Enhanced Security mode settings None security mode settingsStatic WEP security mode settings Select File Æ Add/Remove Snap-in Click ConfigureUsing WPA-PSK Using EAP-TLS Using EAP-TTLS Appendix SpecificationsWireless specifications Items Specifications Disclaimer OpenSSL StatementsOpenSSL License Ddns Dhcp Http SLP Snmp UPnP Ad hoc peer-to-peer mode BonjourBootp Static WEP 6.4 WEP encryption Rev.1.00