TCP/IP environment
3.
6

Configuring a Windows client

After the network administrator has configured the network
print server, each printer user must install the printer driver and
set the print port to Samsung IPP 1.1 Port Monitor.
NOTE
: Before following the steps below, each printer user
should install the printer driver. If the printer driver is not
already installed on the computer, install the printer driver that
came with the printer. Select the local port (LPT) when you
install the driver.
1
From the Windows Start menu, select
Settings
Æ
Printers
, or select
Printers and Faxes
.
2
Right-click the printer you want and select
Properties
.
3
In Windows 95/98/Me, click
Details
.
In Windows NT4.0/2000/XP/2003, click
Ports
.
4
Click
Add Port
.
5
Select
Samsung IPP Port
from the Other list and click
OK
.
6
Enter the printer URL and port name and click
OK
.
7
When the port name displays on the print port list, click
OK
.
Now you can select the network print server from the Print
Setup dialogue box to send a job.

Setting IPP security

SyncThru Web Service allows administrators to choose an
authentication method and to create or modify user accounts.
1
Run your web browser and access SyncThru Web Service.
2
Click
Network Settings
Æ
Raw TCP/IP, LPR, IPP
.
•
Authentication
: You can set a user name and
password encryption method (refer to http digest
authentication in RFC).
•
User DB
: You can set a user name and password for
IPP printing. You can set up the user database for up to
10 items.
3
Click
Apply
.
NOTE
: A user name should be unique for all slots and should
not include symbols. The length of the user name and the
password should each be less than 7 characters.
Additional functions
The following are additional functions you can use through
SyncThru Web Service or SyncThru Web Admin Service.

Printer properties settings

You can check and modify printer and document properties for
an installed printer. For properties that are not supported by the
printer driver, an error message indicating that the property is
not supported is displayed. These settings are used only for
printing from this system to the printer. However , these settings
do not affect the printer properties of the network printer.

Firmware upgrade (HTTP)

You can upgrade your printer’s firmware using the HTTP
protocol. First, you need to download firmware from the
Samsung website (http://www.samsungprinter.com).
NOTE
: Before upgrading the firmware, make sure that TCP/IP
parameters are entered in the print server.
1
Run your web browser and access SyncThru Web Service.
2
Click
Maintenance
Æ
Firmware Upgrade
.
3
Select a firmware type,
Printer Firmware
or
Network
Firmware
.
4
Click
Browse
, and then select the downloaded new
firmware.
5
Click
Upgrade
.
NOTE
: It takes a few minutes to upgrading the firmware.
After completely upgrade, the printer will be reset.

Default setting (HTTP/SNMP)

You can reset all of your network parameter settings to their
default status.
NOTE
: All default parameters will be applied after the print
server restarts.

IP filtering

This security feature (IP Filtering) provides the ability to
prevent unauthorised network access to the network print
server based on IP addresses set by a network administrator
using SyncThru Web Service.
1
Run your web browser and access SyncThru Web Service.
2
Select
Network Settings
Æ
IP filtering
.