Samsung NP35RH04EL/SEK manual To protect the data in the memory card, To use a Memory Stick Duo

2.Click Start > My Computer. The inserted memory card is displayed.

3.You can write data to the memory card. If the memory card is not formatted yet, format the memory card before use.

To remove a memory card

1.Press the end of the memory card softly to pop it outward.

2.Remove the memory card.

Caution Do not remove a memory card for about 20 seconds after format, write, or delete operation in Windows 2000, Me, or 98SE. Removing a memory card immediately

after the operations may cause damage to the memory card caused by the inherent problem of the Windows operating system.

To format a memory card

You can use a memory card after the format operation. The procedures to format a memory card are described below.

Caution Note

Since format operation deletes all data in the memory card, please make sure that there is no important data in the memory card before formatting.

To protect the data in the memory card

Set the write protection tab of the Memory Stick or SD memory card to the Lock position.

1.Click Start > My computer.

2.Press the right touchpad button on the memory card drive, and select Format from the pop-up menu.

3.Click Start to start the format operation.

Caution To use a memory card in both the computer and other digital device such as digital camera, it is recommended to format the memory card in the digital device. If you for-

mat the memory card in the computer, you may have to format the memory card in other digital device again to use the memory card in the digital device.

To use a Memory Stick Duo

Insert a Memory Stick Duo into the Memory Stick Duo adapter and insert the adapter into the Memory Stick slot of the computer.

To Re-install the Memory Stick (Card) Driver

The Memory Stick (Card) needs to be removed prior to installing the driver.

If the driver is installed when the Memory Stick (Card) is installed, remove the Memory Stick (Card), then select Start > Control Panel > System > Hardware tab > Device Manager, remove Other Device and re-install the Memory Stick (Card) driver using the System Software CD.

Chapter 3.Using The Computer 3-9