Samsung NP35TP14LG/SEG, NP35RH033E/SEG Configuring the Password, Setting the Supervisor Password

Configuring the Password

Setting the Supervisor Password

By configuring a supervisor password, you can restrict system access to authorized users only.

Do not lose or forget your password. If you have forgotten your password, contact the Samsung service center.

1.Select the Security menu in the System Setup. To enter System Setup, see “Starting System Setup” on page 71.

2.On the Set Supervisor Password item, press <Enter>.

3.Enter a password, press <Enter>, re-enter the password for confirmation, and press <Enter> again.

4.When a message confirming the password configuration appears in the [Setup Notice] window, press <Enter>.

Setting the User Password

You can configure user passwords so that other users can use the system.

Before configuring a user password, a supervisor password must have been configured.

Users can start the system with their user password, but cannot enter into the System Setup.

Deactivating the supervisor password also deactivates the user password.

On the Set User Password item, press <Enter>, and complete step 3-4 of "Setting the Supervisor Password".

Customizing Your Computer 73