Samsung NP35TP0F5S/SEK, NP35RH033E/SEG, NP35TP13EL/SEG, NP35TP0E62/SEG Setting the User Password

■Setting the User Password

You can configure user passwords so that other users can use the system.

Note Before activating a user password, a supervisor password must have been config- ured.

Users can start the system with their user password, but cannot enter into the System Setup.

Deactivating the supervisor password also deactivates the user password.

On the ‘Set User Password’ item, press <Enter>, and complete step 3-4 of Configuring the Supervisor Password.

■Activating the Booting Password

Note Before activating the booting password, the supervisor password must have been configured.

Set the ‘Password on boot’ option to [Enabled].

From now on, you must enter the password to boot the system.

■Deactivating the Password.

1.On the password to delete, press <Enter>. (e.g. supervisor password)

2.Enter the current configured password, and press <Enter>.

3.Leave the ‘New Password’ and ‘Confirm New Password’ field empty, and press <Enter> to deactivate the password.

Chapter 6. Customizing your computer 6-5