Samsung NP35TP0FBY/SEG, NP35RH033E/SEG, NP35TP13EL/SEG manual Connecting to an Access Point AP

Connecting to an Access Point (AP)

This section describes how to connect to an AP. You can use the network when you are connected to an AP.

Note	The connection setup is described for a computer running on Windows XP Service
	Pack 2. If you are using the Windows 2000 system, refer to P. 4-15 ‘Wireless
	Network Setup Using the Wireless LAN Setup Program’. For more detailed
	information such as the network key (encryption key), ask your network adminis-
	trator.

1.Right-click on the Wireless Network Connection ( ) icon on the taskbar, and select View Available Wireless Networks.

2.Select an AP (E.g. Test) to connect to and click Connect.

When the network key dialog box appears, enter the network key and click Connect.

Note

When a network key is not defined for a selected AP, click on Link to display the warning message box. Then click Connect again in the box.

Now when Connected in AP is displayed, and you can access the network.

Note Checking the connection status.

Move the mouse pointer over the Wireless Network Connection ( ) icon on

the taskbar, and the connection status is displayed.

4-10Manual