Cartridge
Holder
Clip
Filter cartridge
Plastic line (Purchased)
• You can purchase the necessary fi lter cartridge at the retailer where you purchased this refrigerator.
•Water line must be connected to drinkable water only
•When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line(Icemaker supply line)
To use without the water filter
Connecting to the water supply line
•Shut off the main water supply line and turn the Ice maker to the off position.
•Locate the nearest cold water drinking line.
1. Cold Water line
2. Pipe Clamp.
3. Plastic line
4. Compression Nut 5. Compression Sleeve
6. Packing Nut.
7. Shut Off Valve
Connect the water line to the fridge
1.Slip the compression nut through the plastic tubing.
2.After inserting the compression nut into plastic tubing, tighten the compression nut onto 1/4” compression fi tting (Purchased).
Household water line
Copper tubing or Plastic tubing
(Not supplied) | (Not supplied) |
Ferrule
(Purchased)
Plastic Tubing
(Purchased)
Compression Nut (1/4”) (Purchased)
Bulb
Compression fitting (Purchased)
Compression Nut (1/4”) (Purchased)
01 SETTING UP
Refrigerator
Do not overtighten the compression nut.
• Using Copper Tubing
-Slip the compression nut and ferrule on copper tubing as shown.
• Using Plastic Tubing
-Insert the molded end(Bulb) of the plastic tubing into the compression fi tting.
Do not use without the molded end(Bulb) of CAUTION the plastic tubing.
3.Tighten the compression nut onto the compression fi tting.
4.Turn water on and check for any leakage.
• You can purchase the necessary fi lter cartridge at the retailer where you purchased this refrigerator.
•Water line must be connected to drinkable water only.
•When pushing the Refrigerator back, make sure you don’t roll over the power cord or water line (Icemaker supply line).
setting up _17
2012.7.3 10:53:30 AM |
