5.Align the SAMSUNG logo on the Housing and the FRONT label of the Holder Housing so that they face the same direction, and insert the 3 Guides of the Housing into the Guide Hole of the Holder Housing. Turn the Housing counter clockwise by approximately 20 degrees. Finally, fasten the 3 screws (M4xL10).
-Make sure not to let the Gasket loose from the Housing.
(If the Gasket is loose, the product is not properly waterproof.)
HOLDER HOUSING
HOLDER HOUSING |
|
GUIDE HOLE | GASKET |
|
HOUSING
GUIDE
HOUSING
SCREW
GUIDE HOLE
GUIDE
HOUSING | "A" |
| |
| SCREW |
"B"
27
