Samsung SCC-C7435P manual White BAL

WHITE BAL

Lights are generally denoted as color temperatures and expressed in Kelvin (K) units. The general light color temperatures are shown below.

10000K	Blue sky
9000K	Rainy
8000K	Cloudy
7000K
6000K	Partly Cloudy
5000K	Sunny
4000K	Fluorescent lamp
3000K	Halogen lamp
2000K	Tungsten lamp
1000K	Candlelight

You can select one of four modes for white balance adjustment as follows:

-ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the color temperature is monitored continuously and thereby white balance is set automatically. The following are the approximate supported color temperature ranges in these modes.

ATW1 : 2500K ~ 9300K(*1)

ATW2 : 2000K ~ 10000K(Mode recommended for sodium lighting)(*2)

*1. If the color temperature is out of this range in ATW1 mode, proper white balance may not be obtained. In that case, select ATW2 mode.

*2. In ATW2 mode, if one color is dominated in the shot area, the color can be displayed differently. Therefore, select the mode which is appropriate for the environment.

-AWC8 (Auto-Tracing White Balance Control): In this mode, accurate white balance is obtained by pressing the ENTER while having a white paper in front of the camera. White Balance data will be maintained after set it once. AWC mode is best in locations where the color temperature of light source is constant.

ENG

50