Room Monitor, Handset Setup | Radio Shack 43-3704 specs

Setting Menu Options

Ô NOTES Ô

•You must have two handsets to use Room Monitor feature.

•This feature only works when the handset is within the range of the base.

confirmation tone, and DirectLink

Mode Complete appears.

3.To return to normal mode, press the CANCEL soft key and then the OK soft key, or return the handset to the cradle.

Room Monitor

This feature allows you to monitor sounds in another room. Place the handset in the room you wish to monitor; it will function as a microphone. A second handset can be set to function as a remote speaker, allowing you to monitor sounds in the room. Ô

Using Room Monitor

1.Press the MENU soft key and select the Room Monitor menu. Listen to; appears.

2.Select the handset you want to monitor by using CID/VOL/ or REDIAL/P/ .

3.Press the OK soft key. Monitoring appears, and you hear sounds in the room where the handset is installed.

4.To turn off the Room Monitor, press the END soft key, or END.

Handset Setup

The following submenu options must be set separately for each handset.

Selecting a Telephone Line TEL-LINE allows you to set default telephone line. The line you select will be used when you make a call. If you select Auto, the phone will default to whichever line is currently free.

1.Press the MENU soft key. Select the Handset Setup menu, and then the Set TEL-LINE submenu.

18

Image 18

Radio Shack 43-3704 owner manual Handset Setup, Confirmation tone, and DirectLink, Using Room Monitor

Contents

43-3704 Contents Introduction Information FCC Statement Surge Protection Important Safety Instructions Read this Before Installation Important Caller ID Information Installation Selecting a Location On a Desk Top On a Wall Plate or Wall Base downward to secure it Recharging the Battery Pack CONNECTING/CHARGING the Battery Pack Installation To attach the beltclip Installing a BeltclipUsing a Headset To remove the beltclip Example of the standby mode display Display and IconsAnimation Displays Talk mode Soft KEY Function Default Settings Main Menu Options Using the Interface Setting Menu OptionsDirectLink Mode Using DirectLink Mode Room Monitor Handset SetupUsing Room Monitor Confirmation tone, and DirectLink Selecting a Ringer Volume Press the OK soft key. You will hear a confirmation toneSelecting a Ringer Tone Distinctive Ringer Setup Setting the AutoTalk Setting the Anykey AnswerSetting the True Banner Setting the Key Touch Tone Selecting a Language Setting the Animation Screen Setting Room Monitor Answering System Setup Setting a PIN CodeSetting the Ring Time Setting the Record Time Setting the Language of your Answering System Turning the message alert tone off by pressing any keyTurning the message alert tone off from a remote location Global Setup Setting the Call ScreenSetting Day and Time Setting Cidcw Caller ID on Call Waiting Setting the Area Code Setting the Dial Mode DE-REGISTER the Handset Using Your PhoneFrom the handset Making a Call From the Handset Speakerphone Receiving a Call Call Waiting Switching to the Handset Speakerphone During a CallHanging UP Placing a Call on Hold Deleting a Redial Record Storing a Redial Record Adjusting the Handset Earpiece and Speaker Volume Do not Disturb DND Mute Microphone Tone Dialing Switch OverPrivacy Mode Travelling OUT-OF-RANGE Conferencing with 2 outside lines Joining a Conference CallConferencing with one outside line Conferencing Flash and Call Waiting Find Handset Phonebook Storing Phone Numbers NAMES, Distinctive Rings Speed Dial Steps for Entering Names and Special Characters Speed Dial appears. Press Viewing the Phonebook If you make a mistake while entering a name To finish the viewing operation, press Making Calls Using the PhonebookSpeed Dialing To hang up press END Editing or Erasing a Data Editing the Stored Data Copying Phonebook Locations Deleting the Stored Data Testing Stored Emergency Numbers Caller ID Caller ID and Cidcw Caller ID on Call Waiting Viewing the Caller ID List Deleting all Caller ID names/ numbers Using the Caller ID Message ListDeleting Information from the Caller ID List Calling a party from the Caller ID list Long Distance calls and Area Code Setting/Cancellation Viewing the Caller ID List onStoring Caller ID messages in the Phonebook Call Waiting Deluxe Features Expanding Your Phone Dual Handset ExpandabilityRegister the Handset to the Base Using the Directlink Mode INTERCOM/CALL Transfer FeatureDirectLink call Call Transfer Feature IntercomFrom handset to handset Expanding Your Phone Features Integrated Answering Device Pre-recorded message Setting your outgoing message GreetingSetting UP Your Answering System Ô Recording a personal outgoing message Greeting Adjusting the Speaker Volume Level Choosing between the two outgoing messagesDeleting an outgoing message LED stops flashing when all new messages are played back Answering System SettingsSetting the Time REPEAT/SELECT until you hear the correct hour setting Setting a PIN code Setting the ring time Selecting the message record time Press CLOCK/MENU three times Announce only feature Setting the message alertPress SET Confirmation tone sounds, the system Selecting the language From the base Setting the call screenScreening a call To screen an incoming call, do the steps as follows Playing your messages Using Your Answering SystemTo cancel the call screen, press END From the handset Repeating a message Skipping a message Deleting a messageTo maintain maximum record time, delete the old messages. Ô Voice memo Recording a conversationSystem returns to standby Remote access away from home Remote Operation Function Remote access with the handset Remote Key Function ∅/4 Deleting a Message Stop Operation Ô Troubleshooting Symptom Suggestion Keep the handset away from microwave ovens Service and Repair CarePage Memo RadioShack Corporation Fort Worth, Texas