Radio Shack 43-3704 owner manual

Note about Handset-Base Registration

NOTE ABOUT HANDSET-BASE REGISTRATION

When you register the handset with the base, unique data is written on both the base and the handset. The handset registered to one base unit cannot be used with other base unit unless the registration data is “de- registered” with the original base unit. This means the handset must be within the range of the original base unit to de-register. If for any reason the original base unit is not within the range (or the registration data in the original base unit is erased), “Out of Range” error takes place and you cannot de-register the handset.

Should you encounter this trouble, follow these steps to individually de- register the handset and the base.

1.Remove the handset if it sits on the base.

2.On the handset, press and hold END and # at the same time until you hear beep.

3.Disconnect the AC adapter.

4.While holding PAGE, connect the AC adapter. Keep pressing PAGE until the CHARGE LED starts to blink.

5.Place the handset on the base and wait until the CHARGE LED stops flashing.

This erases all the handset registration data on the base, not limited to the handset you placed at Step 5 above. You need to register other handset(s) also if you have more than one. First de-register the handset as in Step 1 above, and then place it on the base.

If you have trouble in de-registration, take your base and handset (including extra handset(s) if you have) to your local RadioShack or call 1-800-The Shack (843-7422) for assistance.

Also, when you request repair or service, please be sure to bring in the entire system (including extra handset if used) so we can keep your registration data intact.

74