A confirmation tone, that can be heard by both parties, sounds during recording.

3.To stop recording, press the MENU soft key and CID/VOL/ or REDIAL/P/ to select Call Record, and then press the OK soft key. You will hear a confirmation tone.

REMOTE OPERATION

You can check, play, or delete messages, even record a new greeting message from a remote location (when you are away from home, or from another room using a handset). Additionally, you can turn On or Off your answering system remotely. Ô

Remote access away from home

You can operate your answering system from a remote location using any touch-tone telephone. Ô

1.Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about ten rings and sounds a series of beeps.

2.During the greeting message (or a series of beeps when the answering system is off), press 0 and enter your PIN code within two seconds (see “Setting a PIN Code” on page 24 or 58).

3.The answering system announces the current time and the number of messages stored in memory. You hear “To play incoming messages, press zero-two. For help, press one-zero”. You will hear a beep.

Ô NOTES Ô

Remote Operation Time stamp will not be

heard until you have set the time. See “Setting the Time” on page 57.

Remote access away from home

The system will only playback messages for four minutes and then it returns to the command waiting mode. To continue playing your messages, press 0 then 2 again within 15 seconds.

If you enter an incorrect PIN code three times, you will hear a beep and the system will return to standby.

During the remote operation,

“Lr” appears on the base.

If the answering system is recording an incoming message, the recording operation is canceled when you start remote operation.

The Integrated Answering Device

67

Page 67
Image 67
Radio Shack 43-3704 owner manual Remote access away from home, Remote Operation