Phonebook

feature. When the phone is in standby mode, press and hold a number key (0-9) associated with the speed dial until the phone number appears and then press TALK/FLASH or SPEAKER. The phone will automatically select a free line. To select a particular line, press the LINE1 or LINE2 soft key. The number stored in the speed dial (SPD1 - SPD0) is dialed.

EDITING OR ERASING A DATA

1.When the phone is in standby mode, press MUTE .

To delete all phonebook locations, press the DELETE soft key. Delete All? appears. Use CID/VOL/ or REDIAL/P/

to select Yes, and then press the OK soft key. You will hear a confirmation tone.

2.Press CID/VOL/ or REDIAL/P/ , or the number keypad to view the phonebook locations (see “Viewing the Phonebook” on page 40).

a.Editing the Stored Data

1.When the phonebook location to be edited appears, press the EDIT soft key.

Press CID/VOL/ or REDIAL/P/ to select Edit?, and then the OK soft key.

2.Follow the steps 3 to 7 under “Storing Phone Numbers, Names, Distinctive Rings, and Speed Dial” on page 38-39 to complete the editing operation.

3.Press the OK soft key. You will hear a confirmation tone.

42

Page 42
Image 42
Radio Shack 43-3704 owner manual Editing or Erasing a Data, Editing the Stored Data