NEW MESSAGE LED
The new message LED on the handset is designed to work with your answering system. The LED flashes when you have new messages in your answering system.
The LED stops flashing when all new messages are played back
Answering System Settings
To set the following seven functions you must enter the menu mode. Ô
Setting the Time
Follow these steps to set the clock on the answering system to the correct time. Ô
1.Press CLOCK/MENU.
2.Press 
SKIP/SELECT or
REPEAT/SELECT until the correct day is announced and the corresponding number (from 1 Sunday to 7 Saturday) appears.
3.Press SET to select the day.
4.Press 
SKIP/SELECT or
REPEAT/SELECT until you hear the correct hour setting.
The numbers 1 through 12 appear on the base as each hour is announced.
5.Press SET to select the hour.
6.Press 
SKIP/SELECT or
REPEAT/SELECT until you hear the correct minute setting.
The numbers 00 through 59 appears on the base as each minute is announced.
7. Press SET to select the minute.
Ô NOTES Ô
Answering System
Settings
•For your convenience, voice prompts will guide you through the menu setup mode.
•A confirmation tone sounds to indicate standby mode.
•You can also set these menus from the handset. See “Answering System Setup” on page 24 for instructions.
Setting the Time Time stamp will not be
heard until you have set the time.
The Integrated Answering Device
57
