Using Your Phone
Ô NOTES Ô
Call Waiting
You must subscribe through your local telephone company to receive Call Waiting or Caller ID on call waiting service.
Placing a Call on Hold
•You can place a call on hold for 15 minutes. When 15 minutes has passed, the call is disconnected, and the phone returns to standby mode.
•While a call is on hold, CIDCW can not be received.
Redialing a Call
•If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.
•If the redial memory is empty, you will hear a beep.
HANGING UP
From the handset, press END or return the handset to the base.
From the handset speakerphone, press END or return the handset to the base.
Switching to the Handset Speakerphone During a Call
To switch a normal call to the speakerphone, press SPEAKER on the handset. To switch from a speakerphone call to a normal call, press SPEAKER.
CALL WAITING
If you have Call Waiting service and a call waiting tone sounds while you are on a call, press TALK/FLASH on the handset to accept the waiting call. There is a short pause, and then you will hear the new caller. To return to the original caller, press TALK/FLASH on the handset again. Ô
PLACING A CALL ON HOLD
1.During a call, press INTCM/HOLD on the handset. The line soft key (LINE1 or LINE2) to be placed on hold will flash. The call will be put on hold. Ô
If you leave a call on hold for more than 10 seconds, the display screen will read Hold.
2.To talk to the caller, press TALK/FLASH or SPEAKER, or the correspond soft key (LINE1 or LINE2). The phone will return back to the call.
REDIALING A CALL
The last three phone numbers dialed can be quickly redialed from the handset. Redial numbers stored in the handset are independent from each other. Ô
32
