Samsung SDR3100 SeTTinG THe DeViCe, Setting the Camera, 44_ main menu, Select <Camera>

main menu

SeTTinG THe DeViCe

You can setup Camera, Storage Device, Remote Device and Monitor.

Camera

Setting the Camera

You can set Video, Audio, Channel Name and Dwell Time of a Camera.

Using the mouse may help make setup easier.

1.Press Bthe [menu] button on the remote control.

2.Use the left/right button (_ +) to select <Device>. Device setting menu is selected.

3.Use the up/down buttons ($%) to move to <Camera>, and press [enTeR] button.

Logout

Device

Camera

Storage Device

Remote Device

Monitor

Return

4. Select <Camera>.
	Camera
You will see a window where you can configure the
	Camera				PTZ
camera settings including Video, Audio, CH Name,
	CH	Video 				Audio 		CH Name	SEQ-Dwell Time 
SEQ-Dwell Time.
	1		ON			ON		CAM 01	5 sec	
	2		ON			OFF		CAM 02	5 sec	
5. Use direction buttons ($%_ +) to move to a desired	3		ON			OFF		CAM 03	5 sec	
	4		ON			OFF		CAM 04	5 sec	
item, and set the value.
• Video
- <On/OFF> : You can turn ON/OFF the selected channel’s	Screen Setup					Privacy Region
camera.						OK		Cancel

-< : Shows information other than the video of channel.

`For privacy protection, it does not display the video while the recording continues.

-<Covert2> : Shows nothing but an empty screen while the recording continues.

•Audio

-If set to <On>, you can turn the audio of the channel ON/OFF on the Live screen.

-If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.

`Audio output is available for only CH1.

•CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.) ` Refer to “Using Virtual Keyboard”. (Page 35)

•SEQ-Dwell Time : You can set the dwell time between channels for the Live screen. ` If set to <OFF>, the channel is not listed in the Auto Sequence mode.Covert1>the selected

44_ main menu