overview
Using the Numeric buttons
1.Press any button among 1 to 4.
2.Move to the selected channel number.
Changing the Remote Control ID
1.Press the ID button of the remote control and check the ID displayed on the DVR screen. The factory default ID of the remote control is 00.
2.Enter 2 digits of your selection in order, while pressing the system [ID] button.
3.When ID input is done, press the system [ID] button again to check the setting.
MM`` If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed. Remote control's ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 48)
