connectIng Web VIeWer (WIndoWS)
1. Open your web browser and type the IP address or URL |
|
|
|
|
|
| |
of DVR into the URL address box. |
|
|
|
The basic URL of the DVR is as following in case of MAC |
| http://www.samsungipolis.com/HOMEDVR |
|
|
|
| |
M address : |
|
|
|
`http://www.samsungipolis.com/User ID
`You can also use registered URL which setups up in the Setup menu of your DVR.
2.Set the Admin ID and password same to those of the DVR Admin.
For general users, enter the DVR user ID and password.
J ` | The default password can be exposed to a hacking thread so | ||
|
| it is recommended to change the password after installing the |
|
|
|
| |
|
| product. | |
| ` | Set password for your wireless network if you use the product with a wireless router. Being not protected with | |
|
| password or using the default wireless router password may expose your video data to potential threat. | |
| ` Note that the security and other related issues caused by the unchanged password shall be responsible for the user. | ||
M | ` | It allows up to 4 simultaneous access including the Admin and general users. | |
| ` It does not allow multiple login of the Admin user. | ||
| ` Initial password of the Admin user is set to “4321”. | ||
| ` Password of the Admin and general users can be changed in <Permission Management> menu of the DVR. | ||
| ` | Normal users should have set <Viewer> under <Permission Management> to “Use” before connecting to the | |
|
| Web Viewer. (Page 35) | |
| ` All settings are applied by the DVR’s settings. |
3. Click <Install ActiveX control…>.
Downloading
4. Click <Install>.
!Web VIeWer