search & play
Preset Setting
A preset is a set of specific target points of a PTZ camera, and up to 127 presets per a camera can be stored.
1.In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.
2.Select the <Save> key.
The virtual keyboard for inputting the preset will appear.
`Refer to “Using Virtual Keyboard”. (Page 35)
•Save : You can save the preset settings.
•Rename : You can change the settings of the existing presets.
•Delete : Deletes the selected preset.
•Delete All : Deletes all existing presets.
M ` If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset accordingly.
3.Press <OK>.
The preset will be saved as a name that you entered.
Camera Setting
A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.
1. Connect the PTZ camera to the DVR and run the PTZ |
|
| |
camera again to display the camera’s protocol setting | |||
window. | SAMSUNG PROTOCOL | ||
2. Check the protocol ID of the camera. | |||
TYPE | |||
` In “Device > Setting the PTZ”, enter the PTZ camera ID | |||
the ID input box of the channel that is connected to the PTZ | ADDR | 0 | |
BAUD | 9600 | ||
camera. (Page 46) | LENS | OK! | |
| TILT | OK! | |
| PAN | OK! | |
in
3.Select <Camera Setup> in the PTZ Control menu. The
`You can configure the settings of only those cameras that support the protocols of Samsung, Pelco D/P, AD and Panasonic.
`If you are setting Auto Pan or Pattern in the camera menu, press and hold the appropriate button for a certain time so that the button operation can be different from that in normal PTZ setting.
** MAIN MENU **
CAMERA SET...
VIDEO SET...
PRESET...
Camera Setup ZONE
SET...
AUTO SET...
ALARM SET...
OTHER SET...
Exit CLOCK SET...
SYSTEM INFO...
