Samsung SDR3100 user manual To set the privacy region

Clear All

Menu

English _45

•Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, configure the DVR display to your preferences.

Select a channel and adjust the < (Brightness)>,

< (Contrast)>, and < (Color)> of the selected channel. ` Press the <Init> to initialize settings back to the default 50.

•Privacy Region : You can specify a certain area of the camera video to be protected for your privacy.

6.When the camera setup is done, press <OK>.

						!main
Screen Setup						menu
CH1	50	50	50	Init	Apply to All CH
		OK		Cancel

To set the privacy region

① Select <Privacy Region>.
② When “Privacy Region” window appears, select a
	channel for detection and set the area of motion
	detection.
• To set the area in “Privacy Region” window
In the “Privacy Region” window,					select desired region		Privacy Region
from <
					>.
							CH1
• Privacy Region
							Privacy Region1
									Individual Apply to All CH
You can specify up to 4 privacy zones for each channel,								OK Cancel
which can be identified by the color.
1		Purple 2	Green 3	Blue 4		Yellow

• To set the area using <individual> selection

When selected <individual>, “Privacy Region” window disappears and you can select cells one by one.

When the motion area setup is done, Right-click to select <menu> in the context menu or the [menu] button on the remote control to display the “Privacy Region” window again.

- Clear All : Selected cell is removed from the Privacy Region.

- Menu : After selecting individual motion areas, move to the “Privacy Region” window.

` If selected <Apply to All CH>, selected motion area is applied to all channels.

③ When completing the privacy zone settings, click <OK>.