Samsung SDR3100 Connecting and Setting the network, When no router is used, 62_ main menu

main menu

Connecting and Setting the network

Networking may differ from the connection method, check your environment before setting the connection mode.

When no router is used

•Static iP mode

-Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the DVR and remote user.

-DVR Network Settings : Set the <Connection mode> in

<Connection> menu of the connected DVR to <Static iP>. Connection ModeConnection

` Consult your network manager for IP, Gateway and Subnet Mask.		Protocol
	 Connection Mode	Static IP
	 Bandwidth
• Dynamic iP (DHCP) mode		2Mbps
	 Gateway	192.168. 1.	1
	 IP	192.168. 1.200
- Internet connection : Connect the DVR directly to a cable	 Subnet Mask
modem, DHCP ADSL modem or FTTH network.		255.255.255. 0
	 DNS
		Manual		168.126. 63. 1
- DVR Network Settings : Set the <Connection mode> in
<Connection> menu of the connected DVR to <Dynamic iP>.
		OK		Cancel

• aDSL (PPPoe: iD and password certification)

- Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection
requires user ID and password.
- DVR Network Settings : Set the <Connection mode> in
		Connection Mode
<Connection> menu of the connected DVR to <aDSL>.
	Connection		Protocol
` <User ID> and <Password> should be the same to the ADSL
		 Connection Mode	ADSL
		 Bandwidth
			600kbps
user information.
If you don’t know the ID and password, consult your ADSL service
		 IP	192.168. 1.200
		 Gateway
			192.168. 1.	1
provider.		 Subnet Mask
			255.255.255. 0
		 DNS
			Manual		168.126. 63. 1
		 User ID	ID
		 Password
			************
			OK		Cancel

62_ main menu