•Be sure that you are holding the phone close enough to your mouth. The microphone is located at the bottom of the phone.
The phone starts beeping and “Low battery” flashes on the display
•Your battery is insufficiently charged. Recharge the battery.
The audio quality of the call is poor
•Check the signal strength indicator on the display (
). The number of bars indicates the signal strength from strong (
) to weak (
).
•Try moving the phone slightly or moving closer to a window if you are in a building.
No number is dialled when you re-call a Phonebook entry
•Use the contact search feature to ensure the number has been stored correctly.
•
If the above guidelines do not help you to solve the problem, take note of:
•The model and serial numbers of your phone
•Your warranty details
•A clear description of the problem
Then contact your local dealer or Samsung after- sales service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured to not exceed the limits for exposure to
The exposure standard for mobile phones employs a unit of measurement known as Specific Absorption Rate (SAR). The SAR limit recommended by the EU Council is 2.0 W/kg.*
The highest SAR value for this model phone was 0.702 W/kg.
*The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged over ten grams of body tissue. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. The SAR values may vary, depending on national reporting requirements and the network band.
77
