4. Remove the bracket-HDD from the product by lifting it upward from the product.
5.Mount the HDD to the bracket-HDD with the SCREW-TAPTITE (BW, +, S, M3, L6, ZPC) (4 spots) that was provided as an accessory. (The screws have to be tightened so that it doesn’t vibrate loose.)
6.Re-mount the built-in HDD bracket-HDD to the place where it was separated from.
The work order for mounting the BRACKET-HDD is in reverse from when disassembling it. Tighten the screw after the BRACKET-HDD’s mounting holes are perfectly aligned with four mounting spots on the bottom.)
SCREWDRIVER
English 2-6
