●Screen Split Selection Button
-Full Screen / Single / Quad /
-You can change the Split Mode of the screen under monitoring.
●Sequence Mode Button
-Changes the channel to be played at the preset interval.
-The sequence time interval can be set at the Setup Mode ➝ Viewer Setup.
-In Single Mode : 1 ➝ 2 ➝ 3 ➝ 4 ➝ 1 (CH)
-In Quad Mode : 1,2,3,4 ➝ 1,2,3,4 (CH)
-In
-In
Note
If you connected with
-In Single Mode : DVR1:3CH ➝...➝ DVR1:4CH ➝ DVR2:1CH ➝...➝ DVR1:1CH
-In Quad Mode : DVR1:1,2,3,4CH ➝...➝ DVR2:1,2,3,4CH
-In
-In
●Monitoring screen condition Information / Selection Button
- Displays the Split or Monitoring condition of the screen in play.
