English
5-18
3
Monitoring●Event Monitoring
It is possible to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous.
①Off : Event Monitoring does not operate to turn to the screen where an event occurs.
➁3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto
Sequence mode.
➂Continuous : The Event Monitoring screen remains alive until you press the “Alarm”
button in the front to cancel the screen manually.
●OSG Display
①Date :
The date is displayed on the screen when it is On, and not displayed when it is Off.
➁ Time :
The time is displayed on the screen when it is On, and not displayed when it is Off
.
➂Cam name : The Cam name is displayed on the screen when it is on, and not displayed
when it is off.
➃Status :
Audio/Ptz is displayed on the screen when it is on, and not displayed when it is off.
●Spot Out Channel
Spot Out channel is used to let one of two monitors monitor a channel, focusing on it.
Spot Out channel supplies two functions, continuous monitoring of only one channel and
Auto Sequence to display all the channels one by one.
①Auto Sequence setup ranges from Ch1 to Ch 4.
➁In the Auto Sequence mode, Spot Out channels are displayed in turn.
➂Duration time for Auto Sequence is as same as set for Camera setup.
●Spot Out Event Monitor
Sets if event monitoring will be executed for Spot Out channels.
①Off : The event monitoring dose not operate in the Spot Out channel.
➁3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto
Sequence mode.
➂Continuous : Once scrolled down, the screen remains displayed until you delete “Alarm”
LED in the front manually.
CancelOK
Monitoring
Event Monitoring Duration Off
OSG Display Date On
Time On
Title On
Status On
Spot Out Channel CH1
Spot Out Event Monitor Off
Monitor Out Composite Out
SHR-2040/2041/2042-ENG-1013 10/19/07 10:23 AM Page 5-18