●DST (Daylight Saving Time)
DST sets the clock one hour ahead the local standard time. This setting enables the system to display the time adjusted for DST. If the DST is set to Off, it does not apply. To set the DST, enter the start time and end time on the right. It allows you to set month, week (e.g. 1st, 2nd, 3rd, 4th, last), day, and time.
Note
[On DST Setup]
Backup in progress will be cancelled. Recording in progress will be suspended for a moment until rebooting.
Caution
[Ending DST]
As the system goes one hour earlier, the data recorded since an hour ago will be deleted. As DST activates at the preset time, you are recommended to take the utmost care of preventing any trouble incurred by data deletion or rebooting.
Password
The factory default password for Admin and user privileges is "4321." In case of user privilege, you can select any of 5 users (User1 to User5) and assign user access rights for the selected user. If you press Setup in User Authority, all the access rights are selected.
●The Default Password is 4321.
●New Password
This is used to change the system password inside
●New Password Confirm
This confirms a new password. You shall be obliged to input New Password in the above row first. Without New Password input, New Password Confirm input has no effect.
