Recording options

ANTI-SHAKE (HDIS)

Use the Anti-Shake (HDIS) function to compensate for unstable images caused by shaking movements when holding the camcorder.

Select the Record (

/

) mode by pressing the MODE button.

page 24

 

 

Tip

Use the Anti-Shake function in the following cases:

 

• When recording while using the zoom extensively.

 

• When recording a close up picture of a small object.

 

•

When recording while walking, or moving.

 

•

When recording through a window from inside a vehicle.

• The SMART AUTO mode automatically sets the Anti-Shake (HDIS) to On.

1.Press the MENU button Control (Left/Right) button “Anti-Shake (HDIS).”

2.Select the desired submenu item with the Control (Up/Down) button, and then press the OK button.

3.Press the MENU button to exit the menu.

STBY 0:00:00 [475Min]

Anti-Shake(HDIS)

Off

On

Exit

STBY 0:00:00 [475Min]

Anti-Shake(HDIS)

Off

On

•Gross camcorder shake may not be entirely corrected even if “Anti- Shake (HDIS): On” is set. Firmly hold the camcorder with both hands.

•When this function is set to “On,” the actual movement of the subject and the movement displayed on the screen may be slightly different.

•Recording in low lighting and at high magnification with this function set to “On” may cause after images. If this occurs, we recommend using a tripod (not supplied) and turning the “Anti-Shake (HDIS)” to “Off.”

Exit

Submenu Items

Items

Off

On

Use

On-screen

display

 

To disable the function.

-

To enable the Anti-Shake (HDIS) function to

 

compensate for shaking movements.