Using with a windows computer
USING THE Intelli-studio PROGRAMME
To disconnect the USB cable after completing the file transfer, you must follow these steps:
1. | Click the “Safely Remove Hardware” icon on the taskbar. |
2. | Select “USB Mass Storage Device”, and then click “Stop”. |
1Set “USB Connect: Mass Storage” and “PC Software: On”.
• These are the default settings.
2Connect the camcorder to a PC with the USB cable.
STBY 0:00:00 [475Min]
SCENE
Settings |
|
|
Shutter Sound | Off | OFF |
Auto Power | On |
|
PC Software |
| |
|
| |
Exit | Move | Select |
. | If the “Stop a Hardware device” window appears, click “OK”. |
4. | Disconnect the USB cable from the camcorder and PC. |
• Use the provided USB cable. (Supplied by Samsung)
• Make sure you insert the USB plug into the USB jack with the plug facing in the correct direction.
•A new file saving window
appears along with the
saving new files will not appear.
• Depending on your version of Windows, the Windows removable disk window may also appear.
•Use the AC power adaptor to power the camcorder when transferring fi les to your computer.
•When the USB cable is connected, turning the camcorder on or off may cause the PC to malfunction.
•If you disconnect the USB cable from the PC or the camcorder while transferring fi les, the data transmission will stop and the data may be damaged.
•If you connect the camcorder to a PC via a USB HUB or simultaneously connect the camcorder along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC, and then reconnect the camcorder.
•
9