Samsung SMX-F500BP/EDC, SMX-F54RP/MEA, SMX-F50BP/EDC manual LCD Enhancer Auto LCD OFF, Auto LCD Off

System setting

LCD ENHANCER AUTO LCD OFF

You can enhance the contrast on the LCD screen for a clearer and brighter image. This effect also works outdoors in bright daylight. You can also adjust the screen brightness in two-level increments, which provides a brighter screen than using just a one-level

To reduce power consumption, the brightness of the LCD screen is automatically dimmed if the camcorder is idle for more than 2 minutes.

increment.

1.	Press the MENU button  Control
	(Left/Right) button  “Settings” 

STBY 0:00:00 [475Min]

1.Press the MENU button  Control (Left/Right) button  “Settings”  Control (Up/Down/OK) button  “LCD Enhancer”

2.Select the desired submenu item with the Control (Up/Down) button, and then press the OK button.

STBY 0:00:00 [475Min]

SCENE

Settings

LCD Brightness		: 0
LCD Colour
LCD Enhancer		: OFF
Exit	Select

	Control (Up/Down/OK) button  “
	Auto LCD Off.”
2.	Select the desired submenu item
	with the Control (Up/Down) button,
	and then press the OK button.

SCENE
Settings
LCD Colour
LCD Enhancer	:	OFF
Auto LCD Off	:	LCDOFF

Exit Select

Submenu Items

Submenu Items

Items

Off

1

2

Use	On-screen
	display
To disable the function.	-
To turn on the 1st level of the LCD Enhancer.	1
To turn on the 2nd, brighter level of the LCD	2
Enhancer.

Items

Off

On

Use	On-screen
	display
To disable the function.	-
When the camcorder is idle for more than
2 minutes in Video or Photo STBY mode, or for
more than 5 minutes when recording a video, the	-
power saving mode starts by dimming the LCD
screen.

3. Press the MENU button to exit the menu.	3. Press the MENU button to exit the menu.
• LCD enhancer function does not affect the quality of the image being
	• When the “Auto LCD Off” function is enabled, you can press any
recorded.
• When you use the LCD Enhancer in low illumination, some stripes	button on the camcorder to return LCD brightness to normal.
may appear on the LCD screen. This is not a malfunction.	• Auto LCD Off will be disabled in the following case:
• Using the LCD Enhancer function may cause colours to look different	- If the DC power cable (AC power adaptor, USB cable) is connected.
on the display.

6