Samsung SNB-3002 user manual If the Broadband Router has more than one camera connected

If using a Broadband Router

•IP Address : Enter an address falling in the IP range provided by the Broadband Router.

ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254

•Subnet Mask : The <Subnet Mask>

of the Broadband Router will be the <Subnet Mask> of the camera.

•Gateway : The <Local IP Address> of

the Broadband Router will be the <Gateway> of the camera.

M The settings may differ depending on the connected Broadband Router model. For more information, refer to the user manual of the applicable router.

For more information about port forwarding of the broadband router, refer to “Port Range Forward (Port Mapping) Setup”. (Page 32)

If the Broadband Router has more than one camera connected

Configure the IP related settings and the Port related settings distinctly with each other.

	Category		Camera #1	Camera #2
IP related settings		IP Address	192.168.1.100	192.168.1.101
		Subnet Mask	255.255.255.0	255.255.255.0
		Gateway	192.168.1.1	192.168.1.1
Port related settings		HTTP Port	8080	8081
		VNP Port	4520	4521

M If the <HTTP Port> is set other than 80, you must provide the <Port> number in the address bar of the Internet browser before you can access the camera.

ex) http://IP address : HTTP Port http://192.168.1.100:8080

● NETWORK CONNECTION AND SETUP

English _29