Samsung SNB-3002 Connecting with Other Device, Ethernet Connection, Power Supply, Power Ethernet

CONNECTING WITH OTHER DEVICE

	SD CARD				AUDIO OUT	AUDIO IN	Monitor
				SD	SYSTEM POWER		(for installation)
VIDEO					RESET
1	2 3 4 5		6	NETWORK		+
1	: ALARM IN	4 : GND		ACT	LINK	AC 24V
2	: ALARM OUT	5	: RS-485+
3	: ALARM COM	6	: RS-485-		GND	DC 12V

Power

Ethernet

Ethernet Connection

Connect the Ethernet cable to the local network or to the Internet.

Power Supply

Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera.

J 	Be careful not to reverse the polarity when you connect the power cable.
	You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
 If both PoE and DC 12V are supplied, the product will operate with the first-applied power source.
	Please make sure the monitor and camera are turned off when connecting them.

● INSTALLATION & CONNECTION

English _19