Samsung SNB-3002 user manual Event Setup, FTP / E-mail

•Enable SNMP v3 : SNMP version 3 will be active.

-Password : Specify the default password for SNMP version 3. The default password is “admin4321”.

The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.

Note that the security and other related issues caused by the unchanged password shall be responsible for the user.

4.When done, click [Apply ( )].

J SNMP v3 is only able to be set when the secure connection mode is HTTPS.

EVENT SETUP

FTP / E-mail

You can configure the FTP/E-mail server settings so that you can transfer the images stored in the camera to your PC if an event occurs.

1.From the Setup menu, select the

<Event ( )> tab.

2.Click <FTP / E-mail>.

3.Select <FTP configuration> or

<E-mail configuration> and enter / select a desired value.

•FTP configuration

-Server address : Enter the IP address of the FTP server that you transfer the alarm images to.

-User ID : Enter the user ID with which you will log in to the FTP server.

-Password : Enter the user account password for logging into the FTP server.

-Upload directory : Specify the FTP path where you will transfer the alarm images.

-Port : The default port of the FTP server is 21; however, you can use a different port number according to the FTP server settings.

-Passive mode : Select <On> if you need to connect in passive mode due to the firewall or the FTP server settings.

● SETUP SCREEN

English _63