Samsung SNB-3002 External PTZ setup, OSD Setup Select OSD Select each item and set it properly

setup screen

OSD Setup

1.Select <OSD>.

2.Select each item and set it properly.

•Camera title : Specify the camera title that will be displayed on the screen.

You can enter up to 15 characters for the title.

•Camera title position x, y : Specify the coordinates where the camera title is displayed.

Time OSD Setup

1.Select <Time OSD>.

2.Select each item and set it properly.

•Time display : Specify the use of time display on the screen.

•Date format : Specify the date format that will be displayed on the screen.

•Time position display X, Y : Specify the position of time.

•Display weekday : Specify whether displays the day of the week on the screen.

External PTZ setup

Configure the connection settings to the external pan/tilt receiver so that you can control the PTZ operations via the receiver connected to the RS-485 port of the camera.

1.Select the <Audio & Video ( )> tab from Setup menu.

2.Click <External PTZ setup>.

3.Specify the serial port.

You can set the RS-485 communication mode for pan/tilt-compliant receiver that is connected to the network camera.

•Protocol : From SAMSUNG-T/ SAMSUNG-E / PELCO-D/PELCO-P / SUNGJIN, select the same protocol as that of the receiver.

•Camera ID : Provide a camera ID.

•Baud rate : Transfer rate for RS-485 communications

•Data : Specify the data bit.

•Parity : Specify the parity bit.

•Stop bit : Specify the stop bit.

54_ setup screen