installation & connection
CONNECTING WITH OTHER DEVICE
Monitor |
|
| AUDIO OUT | AUDIO IN |
SD CARD |
|
|
|
|
| SD |
| SYSTEM POWER | |
VIDEO |
|
| RESET | |
1 2 3 4 5 |
| NETWORK |
| |
1,2 : ALARM IN 1,2 | ACT | LINK | AC 24V | |
3 : GND |
|
| GND | DC 12V |
4,5 : ALARM OUT 1,2 |
|
| ||
Power
Network
Connecting to the monitor
Connect the [VIDEO] port of the camera to the video input port of the monitor.
Network Connection
Connect the Network cable to the local network or to the Internet.
Power Supply
Use the screwdriver to connect each line of the power cable to the corresponding port of the camera.
J | Be careful not to reverse the polarity when you connect the power cable. |
| You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera. |